Pride Elite Trsveller, Owner'S Manual

Page: 34 / 44

34
www.pridemobility.com Elite Traveller
ASSEMBLY
NOTE: Before attempting assembly, tilt the rear half of the Travel Scooter slightly back on the anti-tip
wheels as shown in figure 26.
1. Use the frame release lever to lift the front section as you align the frame hooks of the front section
with the lower frame tube of the rear section. See figure 26.
2. Once the frame hooks are over the lower frame tube, lower the front section completely. This will
engage the frame lock-up.
3. Raise the tiller and fully tighten the tiller adjustment knob.
4. Reinstall the battery pack.
5. Reinstall the seat and rotate it until it is secured into place.
6. Unlock the front wheel by turning the tiller lock knob 90° counterclockwise. See figure 25A .
WARNING! After assembly, make absolutely certain the tiller lock knob is in the unlocked
position before riding your Travel Scooter.
V I I . D I S A S S E M B L Y A N D A S S E M B L Y
FRAME RELEASE LEVER
FRAME HOOK
Figure 26. Frame Release Lever
LOWER FRAME TUBE
·