Pride Air, Owner'S Manual

Page: 16 / 32

16 www.pridemobility.com Jazzy Air
I V. C O M F O R T A D J U S T M E N T S
Figure 11. Foot Platform Adjustment
HARDWARE
ADJUSTMENT
SCREW
FOOT PLATFORM
SUPPORT
Foot Platform Height Adjustment
The foot platform height is easily adjusted to different
heights in 0.5-in. (1.27-cm) increments.
To raise or lower the foot platform:
1. Remove the hardware from the foot platform
support. See fi gure 11.
2. Raise or lower the foot platform to the desired
height.
3. Reinstall the hardware into the foot platform
support and tighten.
Foot Platform Angle Adjustment
You can adjust the angle of the foot platform. See
fi gure 11.
To adjust the foot platform angle:
1. Flip up the foot platform and locate the adjustment
screw.
2. Turn the adjustment screw to raise or lower the
front of the foot platform.
Figure 12. Positioning Belt Adjustment
Positioning Belt
Your power chair may be equipped with a positioning
belt that can be adjusted for operator comfort.
See
fi gure 12. The positioning belt is designed to support
the operator so that he/she does not slide down
or forward in the seat. The positioning belt is not
designed for use as a restraining device.
WARNING! The positioning belt is
not designed for use as a seat belt
in a motor vehicle. Nor is your power
chair suitable for use as a seat in
any vehicle. Anyone traveling in a
vehicle should be properly belted
into seats approved by the vehicle
manufacturer.
WARNING! The positioning belt
should be secured at all times. Never
allow the positioning belt to hang or
drag on the fl oor as it may become
entangled.