17
Mobility Products. Ltd.
www.pridemobility.co.uk
XII.
Power Module
1.
Turn off power to the joystick.
2.
Ensure the unit is in drive mode.
Tools Required:
- Phillips Screwdriver
3.
Remove the front electronics door.
See Section I.
4.
Remove the screws that secure the power module to the
main frame.
5.
One at a time, disconnect the motor, power, bus, and
PTO/run plug harnesses and connect them to the replace-
ment power module.
6.
Reverse steps 3 and 4 to complete installation.
GC
Bus
Ca
b
le
VR2
Left Motor
Right Motor
Power/Battery
Right Motor
Power/Battery
Run
Plug
Power
S
eat
Inhi
b
it Harness
Power
S
eat
Power Harness
Left Motor
3
Harness removal and installation
Power Module Hardware removal and installation
1