10
Mobility Products. Ltd.
www.pridemobility.co.uk
V.
Front/Rear Castor Assembly
1.
Turn off power to the joystick.
2.
Ensure the unit is in drive mode.
3.
Prop up the side of the unit being serviced.
Tools Required:
- Imperial Socket Set
- Imperial Spanner Set
- Calibrated Torque Spanner/Wrench
- Flathead Screwdriver
- Needlenose Pliers
4.
Pry off the rear castor barrel cap.
5.
With a spanner and socket remove the upper nut securing the assembly in the castor barrel.
6.
With needlenose pliers, remove the washer, o-ring, and shim from the castor barrel.
7.
Slide the castor assembly out of the castor barrel.
8.
Reverse steps 4 to 7 for installation. Torque the nut to
30 N • m (21.7 ft • lb).
1
Articulating Beam
Castor Cap
Front Castor Cap
O-ring
S
him
Washer
Tor
q
ue the nut to
3
0 N • m (21.7 ft • l
b
)
7
Front Castor Barrel Cover/Rear Castor Barrel Cap
removal and installation
Castor Assembly removal and installation.
