background image

12

www.pridemobility.com                                           Jet 3/Rev I/Feb03

I I .   S A F E T Y

Inclement Weather Precautions

WARNING! Pride recommends that you do not operate your power chair in icy or slippery

conditions or on salted surfaces (i.e., walks or roads). Such use may adversely affect the

performance and safety of your power chair, resulting in an accident and personal injury.

WARNING! Do not expose your power chair to any type of moisture at any time (rain, snow,

mist, or wash).  Such exposure can damage your power chair. Never operate your power

chair if it has been exposed to moisture until it has dried thoroughly.

Reaching and Bending

Never reach, lean, or bend while driving your power chair. If it is absolutely necessary to reach, lean, or bend while

seated on your power chair, it is important to maintain a stable center of gravity and keep the power chair from

tipping. Pride recommends that the power chair user determine his/her personal limitations and practice bending

and reaching in the presence of a qualified healthcare professional.

WARNING! Do not bend, lean, or reach for objects if you have to pick them up from the floor by

reaching down between your knees. Movements such as these may change your center of gravity

and the weight distribution of the power chair. This may cause your power chair to tip, possibly

resulting in personal injury. Keep your hands away from the tires when driving.

Batteries

In addition to following the warnings  below, be sure to comply with all other battery handling information. For

more information about your power chair’s batteries, see VII. “Batteries and Charging.”

WARNING! Power chair batteries are heavy. See specifications table. If you are unable to lift that

much weight, be sure to get help. Lifting beyond your capacity can result in personal injury.

WARNING! Battery posts, terminals, and related accessories contain lead and lead compounds.

Wash hands after handling.

WARNING! Always protect the batteries from freezing and never charge a frozen battery. Charging

a frozen battery may result in personal injury and/or damage to the battery.

Preventing Unintended movement

WARNING! If you anticipate being seated in a stationary position for an extended period of time,

turn off the power. This will prevent unexpected motion from inadvertent joystick contact. This will

also eliminate the possibility of unintended chair movement from electromagnetic (EM) sources.

Failure to do so may result in personal injury.

All manuals and user guides at all-guides.com

Summary of Contents for JET 3
















































Reviews: