7
I I I . YO U R S C O O T E R
TILLER CONSOLE
The tiller console houses all of the controls needed to drive your scooter, including the speed adjustment
dial, throttle control lever, battery condition meter, lights switch, hazard lights switch, and horn buttons.
See figure 1.
PROHIBITED! Do not expose the tiller console to moisture. In the event that the tiller console does
become exposed to moisture, do not attempt to operate your scooter until the tiller console has
dried thoroughly.
Horn Buttons
These buttons activate a warning horn. Your scooter must be powered up for the horn to be operational.
Do not hesitate to use the warning horn when doing so may prevent accident or injury.
Key Switch
Insert the key into the key switch and turn it clockwise to power up (turn on) your scooter.
Turn the key anticlockwise to power down (turn off) your scooter.
WARNING! If the key is moved to the “off” position while your scooter is in motion, the electronic
brakes will engage and your scooter will come to an abrupt stop!
Battery Condition Meter
When the key is fully inserted and turned clockwise to power up your scooter, this meter indicates the
approximate battery voltage strength. For further information on battery charging, see IV. “Batteries and
Charging.”
Turn Indicator Buttons
Use these buttons to turn on the left and right turn indicator (amber) lights.
See figure 1.
Push the left button to activate the left turn indicator light.
Push the right button to activate the right turn indicator light
The indicators are timed to shut off automatically.
SPEED ADJUSTMENT
DIAL
THROTTLE CONTROL
LEVER
LEFT TURN INDICATOR
HORN BUTTON
HAZARD LIGHTS SWITCH
BATTERY CONDITION
METER
RIGHT TURN INDICATOR
KEY SWITCH
THROTTLE CONTROL
LEVER
HORN BUTTON
LIGHTS SWITCH
Figure 1. Tiller Console
