20
V I . C O M F O R T A D J U S T M E N T S
SEAT ROTATION ADJUSTMENT
The seat rotation lever will secure the seat into
several positions.
1. Push forward on the seat rotation lever to
disengage the seat.
See figure 14.
2. Rotate the seat to the desired position.
3. Release the lever to secure the seat into place.
FRONT-TO-BACK SEAT ADJUSTMENT
You can reposition the seat forward or rearward to
adjust the distance between the seat and the tiller.
1. Move the seat sliding lever located at the lower
left side of the seat outward.
See figure 19.
2. While holding the lever out, slide the seat forward
or rearward.
3. Release the seat sliding lever once the seat is in
the desired position.
SEAT HEIGHT ADJUSTMENT
The seat can be repositioned to different heights.
See figure 20.
1. Remove the seat and rear shroud from your
scooter. See VIII. “Disassembly and Assembly.”
2. Loosen the seat height adjustment nut and
remove it from the bolt. Remove the bolt.
3. Loosen the clamp-action bolt.
4. Raise or lower the upper seat post to the desired
seat height.
5. While holding the upper seat post at that height,
match up the locating holes in the upper seat
post with those of the lower seat post.
6. Insert the seat height adjustment bolt through
the locating holes of both the upper and lower
seat posts.
7. Install the nut onto the bolt and tighten
8. Tighten the clamp-action bolt.
9. Reinstall the rear shroud and the seat.
Figure 19. Seat Position Adjustments
Figure 20. Seat Height Adjustment
ADJUSTMENT DIAL
SEAT ROTATION LEVER
SEAT SLIDING LEVER
NUT
UPPER
SEAT POST
LOCATING HOLES
SEAT HEIGHT
ADJUSTMENT
BOLT
To adjust your scooter’s reclining seat, perform these steps. See figure 18.
1. With your back pressed up against the seatback, lift up on the seatback adjustment lever and lean
forward or rearward to adjust the seatback angle.
2. Release the seatback adjustment lever once the seat is in a comfortable riding position.
LOWER
SEAT POST
CLAMP-ACTION
BOLT
SEAT HEIGHT
ADJUSTMENT NUT
