FAN FILTER UNIT
SERVICE INSTRUCTIONS
Step 6:
Remove the housing exposing the motor/blower assembly.
Step 7:
Remove 7/16” nuts holding motor/blower assembly in place.
Step 8:
Drop motor/blower assembly out of unit. Be careful as wire connection are still in place.
Step 9:
Disconnect plug and play connection connecting wires from motor to control box.
Step 10:
Remove motor/blower assembly.
Step 11:
Inspect and/or replace parts.
Step 12:
Replace with the new motor/blower assembly and reassemble by reversing the above steps.
Step 13:
Double check airflow to ensure that set point has not changed.
NOTE:
For information on how to order replacement motor/blowers,
contact your local Price Sales Representative.
MOTOR-BLOWER HOUSING REMOVAL
2X2 MOTOR-BLOWER HOUSING REMOVAL
SPEED CONTROL AND MOTOR HARNESS CABLES 115V SHOWN
29
priceindustries.com | FAN FILTER UNIT - Manual
