PRG VARI LITE VL5, Service Manual

Page: 55 / 142

VL5 ™ WASH LUMINAIRE SERVICE MANUAL 45
Pan Mechanism Assembly Replacement
Parts: :
22.9634.0009 1 EA ASSY, PAN/TILT MECHANISM, VL5
55.2186.0001 2 EA CABLE TIE, .10" WD 4.00" LG SMALL
Tools:
Screwdriver, #2 Phillips
Screwdriver, #1 slotted
Nutdriver, 5/16"
Diagonal cutters
T-wrench, long handled
To remove and replace pan mechanism assembly:
WARNING: All maintenance procedures are to be performed with power removed from luminaire.
Step 1. Disconnect luminaire AC input cable from power source.
Step 2. Remove both yoke leg covers.
Step 3. At yoke top cross member, using #2 Phillips screwdriver, remove four 6-32 X 5/16" PPZ screws and four #6
lock washers securing heatshield to cross member, and remove heatshield. Figure 2-27.
Step 4. Disconnect input cable wiring.
Figure 2-27: Disconnecting Pan Mechanism Assembly Wires
PANREMV
Lamp Power
Bundles
Pan Mechanism
Belt Adjustment Screw
Heatshield
(Disconnect)
Pan Cable
Assembly
#6 Lock Washer (4)
6-32 X 5/16" PPZ Screw (4)