![PRG SmartXcan Quick Start Manual Download Page 8](http://html1.mh-extra.com/html/prg/smartxcan/smartxcan_quick-start-manual_1599753008.webp)
8
©2020 Production Resource Group, L.L.C. All Rights Reserved
Specifications are subject to change without notice. July2020
Compliance
This device complies with Part 15 of the FCC rules. Operation is subject to the following two
conditions:
1) This device may not cause harmful interference, and
2) This device must accept any interference received, including interference that may cause
undesired operation.
Conforms to:
UL STD 1573
PENDING CERTIFICATION to:
CAN/CSA STD E598-1
CAN/CSA STD E598-2-17
Important Safety Instructions
+
Read these instructions.
+
Keep these instructions.
+
Heed all warnings.
+
Follow all instructions.
+
Not to be used in any other way not specified by the manufacturer.
+
Do not use this apparatus near water.
+
Use caution when cleaning.
+
Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
+
Protect the power cord from being walked on or pinched, particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
+
Unplug this apparatus during lightning storms or when unused for long periods of time.
+
Refer all servicing to qualified service personnel. Servicing is required when
the apparatus has been damaged in any way, such as power-supply cord
or plug is damaged, input ports are damaged, liquid has been spilled or ob-
jects have fallen into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been dropped.
+
In Europe: The building installation shall be regarded as providing pro-
tection in accordance with the rating of the wall socket outlet.
+
In Finland: Laite on liitettävä suojamaadoituskoskettimilla varustettuun pistorasiaan.
+
In Norway: Apparatet må tilkoples jordet stikkontakt.
+
In Sweden: Apparaten skall anslutas till jordat uttag.
+
No naked flame sources should be placed on the apparatus.
+
Apparatus not for use in tropical climates.
+
The apparatus shall not be exposed to dripping or splashing. No objects
filled with liquids, such as vases, shall be placed on the apparatus.
Medical Disclosure
This manual is not intended to define any policy or procedures.
The SmartXcan is not a medical thermometer. It shall not be utilized as a substitute for an
examination by a medical professional. A medical examination is always necessary to determine
a subject’s exact temperature.
The PRG SmartXcan is NOT a product intended for use in the diagnosis of disease or other
conditions or in the cure, mitigation, treatment, or prevention of disease; the device is not
covered under section 201(h) of the FD&C Act (21 U.S.C. 321(h)).
The measurement should not be solely or primarily relied upon to diagnose or exclude a
diagnosis of COVID-19, or any other disease.
a) Elevated body temperature in the context of use should be confirmed with secondary
evaluation methods (e.g., an NCIT or clinical grade contact thermometer)
b) Public health officials, through their experience with the device in the particular environment
of use, should determine the significance of any fever or elevated temperature based on the skin
telethermographic temperature measurement;
c) The technology should be used to measure only one subject’s temperature at a time
d) Visible thermal patterns are only intended for locating the points from which to extract the
thermal measurement.
This temperature measuring device meets the (IEC 80601-2-59;2017) standard relating to
requirements for safety and essential performance of screening thermographs.
Electrical Safety
WARNING! For personal safety, this equipment must be properly grounded when connected to
an AC power source.
Do not, under any circumstances, cut or remove the ground prong from the power cord.
The power cord of this equipment is shall be minimum 18AWG with a grounding plug that mates
with a grounded outlet to minimize the possibility of electric shock hazard from this equipment.
The plug that mates to the outlet shall be compatible with the country standards the product
shall be used in. The connector mating to the device’s C14 inlet will be an IEC 60320 C13
connector.
Ensure the outlet that the device will be connected to is properly grounded. NEVER use a ground
lift or any other device which would not connect the device to ground.