PRG GC RFS User Manual Download Page 2

Page: 2 / 84

AutoPar

, Bad Boy

, Best Boy

, Followspot Controller™, GroundControl™, Mbox

, Mini Node™, Nocturne

, Series 400

, Remote Followspot

System™, ReNEW

, Super Node™, UV Bullet™, V476

, V676

, Virtuoso

, and White Light Bullet™, are trademarks of Production Resource

Group, LLC, registered in the U.S. and other countries.

All other brand names which may be mentioned in this manual are trademarks or registered trademarks of their respective companies.

This manual is for informational use only and is subject to change without notice. Please check www.prg.com for the latest version.

PRG assumes no responsibility or liability for any claims resulting from errors or inaccuracies that may appear in this manual.

GroundControl™ Remote Followspot System™ User Manual

Version as of: May 9, 2016

PRG part number: 02.9833.0001 A

Production Resource Group, LLC

Dallas Office

8617 Ambassador Row, Suite 120

Dallas, Texas 75247

www.prg.com

GroundControl™ Remote Followspot System™ User Manual

Summary of Contents for GC RFS





















































































Search results

Summary of Contents for GC RFS

Reviews:

Related manuals for GC RFS

Brands by name

Popular brands

PRG GC RFS, User Manual

Search results

Summary of Contents for GC RFS

Reviews:

Related manuals for GC RFS

Brands by name

Popular brands