PRG BEST BOY HP SPOT LUMINAIRE Service Manual Download Page 23

Page: 23 / 241

BEST BOY

HP SPOT LUMINAIRE

SERVICE MANUAL

TROUBLESHOOTING

PAGE

Test Sub-Menu Screens

Disable Screen

- Specifies mechanisms

to be excluded from tests.

Moiré Gobos Screen

- Provides a way to

specify which wheel positions contain
Moiré gobos (M).

Mechanical Tests Screen

- Specifies

mechanisms to be tested.

Cleaning Lenses Screen

- Positions

lenses so that they may be easily cleaned
with a cloth.

Recalibrate Screens

- Specifies a

specific mechanism for recalibration.

Group Tests Screen

- Allows multiple

luminaires to be tested when daisy-
chained together.

Fuse Map

- Provides the circuit board

location for all mechanism fuses.

Summary of Contents for BEST BOY HP SPOT LUMINAIRE


















































































































































































































































Search results

Summary of Contents for BEST BOY HP SPOT LUMINAIRE

Reviews:

Related manuals for BEST BOY HP SPOT LUMINAIRE

Brands by name

Popular brands

PRG BEST BOY HP SPOT LUMINAIRE, Service Manual

Search results

Summary of Contents for BEST BOY HP SPOT LUMINAIRE

Reviews:

Related manuals for BEST BOY HP SPOT LUMINAIRE

Brands by name

Popular brands