36
BAD BOY
®
SPOT LUMINAIRE FIELD SERVICE MANUAL
Cleaning the Lenses
Tools:
(2) Micro Fiber cloths (06.6085.0001.0)
OptiMax™ Ultra Pure Cleaning Solution (06.6084.0001.0)
Cotton gloves or finger cots
#2 Phillips screwdriver
Hook & Pick tool
To clean lenses:
CAUTION:
Use caution when handling lenses. Avoid scratching optical surfaces.
CAUTION:
Use ONLY OptiMax™ Ultra Pure Cleaning Solution to clean optical components. DO NOT use
Window Cleaner on lenses! Wear cotton gloves or finger cots when handling lenses/glass.
Step
1. Apply power to luminaire and set intensity to 20%. (A beam will be necessary to see dirt and dust on the
lenses.)
Step
2. Remove R1-side head cover to access Zoom Lens Assembly (head cover doors have a label to identify
them). See
Figure 3-8
on
page 38
.
Step
3. At menu TEST screen, press "Clean Lenses." The Cleaning Lenses screen will open.
Step
4. Press "Pos1" to position lenses in first cleaning configuration.
CAUTION:
When cleaning, do not allow the cleaning cloth to come into contact with the lens carrier rail. The
rail has lubrication that will contaminate the cleaning cloth. Wear cotton gloves or finger cots.
Step
5. If lenses are only dusty, use Micro Fiber cloth to carefully wipe lens surfaces. If further cleaning is required,
use OptiMax™ Ultra Pure Cleaning Solution and a Micro Fiber cloth to clean.
DO NOT use window cleaner!
Step
6. At menu, press "Pos2" to position lenses in second cleaning configuration. (This will allow access to the
remaining lens surfaces.)
Step
7. As in Step 5 above, clean remaining lens surfaces and front of luminaire Front Glass.
Step
8. To clean backside of Front Glass and front of Lens Group 4, remove Front Glass as follows:
a.
Position luminaire head so that Front Glass is facing upward. (To prevent it from falling onto the floor
when the Retaining Ring is removed in the next step.)
b.
Insert hook & pick tool under notch in Front Lens Retaining Ring. Carefully remove Retaining Ring.
c.
Remove Front Glass and place facedown on a Micro Fiber cloth.
