11
GETTING STARTED
for patients using
STRIPS
for patients using
STRIPS
Turn on monitor
Press and release the center button on the monitor once.
If contact between the Strip and your skin is satisfactory:
The monitor makes a quick series of three rising beeps and the green light blinks every 5 seconds.
You are
successfully monitoring.
If contact between the Strip and your skin is NOT satisfactory
:
The monitor alerts you with two beeps every second. If this occurs:
1. Press and hold the center button on the monitor for 12 seconds. After 12 seconds, the monitor lights will
flash once, followed by a long beep. This indicates that the monitor has powered off.
2. Revisit the previous steps in this manual to ensure that:
• The monitor is securely attached to the Strip (
page 7
).
• BodyGuardian Mini is properly placed and securely adhered to your chest (
pages 9-10
).
3. Power on the monitor by pressing and releasing the center button on the monitor once.
• If the monitor does not beep continuously, you are successfully monitoring.
• If the monitor beeps twice every second, remove the Strip, use a new Strip, and begin again on
page 6.
Summary of Contents for BodyGuardian MINI
Page 26: ......
