www.preval.com
Page 14
1. How do I uSE THE FAN AIRcAp?
The fan aircap is designed like a paint gun used for painting cars. The tip is
designed to give the user a better, more even result over large areas. It can
be turned in any angle to give you the most control (up to 3 inches).
2. How do I uSE THE STANdARd AIRcAp?
The standard aircap is used for more precise control and to achieve very fine
lines up to an inch. Simply screw off fan cap and screw on standard cap. As
you get closer to the surface, the greater the detail.
3. wHAT pSI doES AN AIRbRuSH NEEd To woRk?
It depends on how thin the paint is: Thinner paints use 20 or higher PSI and
thicker paints use up to 75 PSI.
4. wHAT ARE THE bEST coNdITIoNS To woRk IN?
Dry, calm areas are best. The more wind there is, the more overspray there will
be and the harder it will be to control the paint’s path. Humidity, heat and cold
will affect paint curing.
5. cAN I uSE THE vFAN AIRbRuSH wITH A coMpRESSoR?
yes, the vFan Airbrush works with our Ultra-Light Compressor and most
compressors. Our airhose attaches to a standard 1/4 inch threaded intake.
6. IS THE vFAN AIRbRuSH SAFE To uSE INdooRS?
yes, as long as it is a well-ventilated area. Using a mask is always recommended
with spray paints or chemicals.
7. wHAT IS THE bEST METHod FoR uSING THE vFAN AIRbRuSH SYSTEM
wITH 150 FEET oF ENERGY?
The best method is with our EDU Unit.
8. wHAT cAN I SpRAY wITH THE vFAN AIRbRuSH?
Almost anything (oils, liquids or paints) thinned to the manufacturers’
recommended thinning guidelines. With regards to viscosity, keep the liquid
a bit thicker than milk.
9. IS THE vFAN SAFE FoR Food?
yes, when using the vFan Airbrush with a properly filtered air compressor, it is
safe for spraying food as long as the product you are spraying is also safe. We
don’t recommend using
150 Feet of Energy
units when spraying foods.
The vfan PorTable airbruSh SySTem
fReQuently askeD QuestIons
