background image

                            • Do not touch the power plug with wet hands. Always disconnect the plug and do not pull off 

the power cable. Do not use the power cable to lift, carry or hold the pump in any way. Do not use the cable for 

uses different to the specified use. Do not pull the cable while the pump is running. It can get damaged and cause 

an electric shock.

• This line of submersible pumps is designed to pump 

fresh and clean water from springs, wells and other water 

reservoirs, as well as water reservoirs or irrigation systems 

with clean water and solid particles up to 0.2”

                           • To prevent blockages, do not operate 

the pump with waters containing larger particles.

                             • Do not pump corrosive, combustible 

or explosive substances (gasoline, petroleum, thinner 

nitrate) grease, oil, salt and sewer water.

                           • The pump is not designed to operate 

continuously. Cannot be used replacing continuous use 

fixed pumps. The useful life of the pump will be shorter in 

relation to the use.

                          • The pump is not adequate for 

commercial use, nor for permanent circulation and filtering 

systems, or to be used with liquids containing abrasive 

materials, or soil, sand, mud, or clay mixes. Any of those 

uses is considered inadequate and can damage the pump. 

• The temperature of the liquids shall not exceed 95 °F, nor 

as cold as there is the possibility of freezing.

                           • Prevent the pump from running dry.

5

CAUTION

CAUTION

CAUTION

CAUTION

Appropriate Use of the Pump

                            • Do not use the pump in the nearness 

of areas where explosives, flammable liquids or gases are 

kept. 

                          • Any change or modification to the 

pump and the use of non-approved spare parts could 

damage the equipment and cause accidents.

                            • To prevent accidents, it is forbidden to 

wash things, swim or bathe into the water container where 

the pump is running.

                          • Always verify the pump before each use, 

(especially the power cable and its plug). A damaged 

pump shall not be used. Go to a                                  

Authorized Service Center to have it fixed.

                           • Any type of repairs shall be carried out 

by a certified technician. If repairs are carried out in a faulty 

manner there is danger of liquid entering into the electric 

components.

                             • It is not advisable that people 

(including children), with reduced physical, sensorial or 

mental capacities, as well as people with no experience or 

knowledge, use the pump except if they are supervised by 

people responsible for their safety or having received 

previous instructions for the pump’s use.

                          • Children shall be supervised to ascertain 

they do not play with the pump. Strict supervision is 

required when people with reduced capacities or children 

use any power device or are close to them.

WARNING

CAUTION

WARNING

CAUTION

CAUTION

CAUTION

WARNING

WARNING

ENGLISH

Safety Warnings for

Submersible Pumps

WARNING

It is recommended to tie a rope to the carrying handle to lift the pump.

Summary of Contents for 27197

























Reviews: