![background image](http://html.mh-extra.com/html/pretul/26024/26024_user-manual_1599503020.webp)
1
2
3
4
Increase pressure
Decrease pressure
Trigger
Start Up
Turning ON
Spraying
Lance Nozzle
• Press the gun trigger to start spraying.
• To stop spraying, just release the trigger.
• The gun has a blocking button (
A
) to prevent
accidental spraying. Pointing the gun to the front, the
button will show to the left when the trigger is blocked
and to the right, when it is released.
• Open the water faucet. Keep it open while using the pressure washer.
• Completely untangle the power cable and connect the plug into the power supply. In this step, do not turn ON the
pressure washer.
• Press and hold the high-pressure gun trigger to release the air trapped inside the pressure washer. Release the
trigger when the water flows constantly.
• Turn the switch into position
I
(ON). The motor will start momentarily and then, it will stop.
8
A
• Adjustable mist nozzle:
Turn the nozzle to open or close the mist angle.
The mist, with the open angle encompasses a wider surface and is ideal to rinse
surfaces.
With the angle closed, mist is aimed to one point and is ideal to clean.
• Turbo spray nozzle:
High-pressure mist pattern for optimal cleaning. Keep the nozzle at a 8”
minimum distance from the surface to be washed.
• To use standing water instead of running water, set the standing water container at
least 1 meter high regarding the ground level. It is necessary to have a safe and
adequate connection (flexible hose).
• Before operating the pressure washer, double check the high-pressure hose is
disconnected.
• Connect the flexible hose coming out of the standing water container into the
pressure washer inlet. Verify the flow into the pressure washer is constant.
• Turn ON the pressure washer until water starts flowing. Leave the pressure washer
ON one minute maximum.
• Turn OFF the pressure washer and connect the high-pressure hose. Now, you are
ready to use the pressure washer.
• It is important that the standing water container is full all the time.
Using the pressure Washer dry more than 2 minutes will damage the high-pressure
pump and it is not cover with the Warranty.
Using standing water
WARNING
ENGLISH
DRAFT
DRAFT
DRAFT