The internal battery will give many hours of use between charges. It is impossible to say how often
it will be necessary to charge the unit as this depends on the level of usage. When the battery
is running low, the low-battery LED [5] will begin to flash. This is an indication that it is time to
recharge unit using the supplied wall adapter.
To charge the battery, plug the wall adapter into the charging socket [10]. After a few moments
the charging LED [4] lights to indicate that charging is in progress. Recharging a completely flat
battery takes around 2.5 hours but the unit may continue to be used during this time (in which
case charging may take a little longer). Once the battery is fully charged, the charging LED is
extinguished.
Should the wall adapter ever become lost, it is extremely important to replace it with one of the
same voltage and specification to prevent damage to the unit. Please contact your local distributor,
or Pretorian Technologies directly, to purchase a replacement.
In certain circumstances it may be useful to manually power the unit off- for example when
transporting it. To achieve this, press and hold the Function switch [7] for 5 seconds. As it powers
off, all the segments of the display light momentarily to show that it is powering down.
To wake the unit again, press any button or any external switch.
EnvirON Remote
is warranted against defects in manufacturing and component failure. The unit is
designed for use in domestic, educational, healthcare and commercial applications. Use outside of
these areas will invalidate the warranty.
EnvirON Remote
is not authorised for use with safety critical, mission critical or life/health
sustaining apparatus of any kind.
Unauthorised repair or modification, the use of an incompatible power supply, mechanical abuse
or immersion in any liquid will also invalidate the warranty.
Battery Charging
Manual Power Off
Warranty
Summary of Contents for EnvirON
Page 11: ...Notes ...
