background image

Pack Contents

Carefully check the contents 
of the box, which are:

EnvirON Remote

Universal wall adapter

Configuration chart

These instructions

INSTRUCTIONS

Scanning Remote Control

Product Description

EnvirON Remote

 is a handheld or mountable remote 

control  which  forms  part  of  the  innovative  EnvirON 

range of Environmental Controls. The unit may be used 

with any combination of EnvirON receivers, typically 

EnvirON Hub, iClick or Environ Connect, to control the 

user’s surroundings.
Because 

EnvirON Remote

 is a wireless device it does 

not suffer from the directional behaviour of infra-red 

based systems, allowing the user the freedom to place 

the remote in any position and at any angle to achieve 

the  most  comfortable  and  practical  configuration. 

EnvirON Hub then converts the wireless signals from 

EnvirON Remote

 to infra-red.

Each  of  the  eight  touch  sensitive  buttons  may  be 

configured  to  work  with  any  receiver  to  achieve  any 

combination  of  wireless  and  infra-red  functions. 

Multiple  buttons  may  also  be  grouped  together  for 

use with a single receiver, making programming very 

straightforward. The function of each button may be 

configured using the built-in display.
For  users  who  may  have  difficulty  using  the  touch 

buttons,  two  3.5mm  sockets  on  the  rear  of  the  unit 

allow one or two-switch scanning to be used instead.

The unit has a built in rechargeable lithium-ion battery 

to provide several days of use between charges, or it 

may  be  permanently  powered  from  a  supplied  wall 

adapter or from a wheelchair auxiliary power port.
Each of the eight buttons may be marked with a pen 

or with suitable self-adhesive labels to indicate their 

functions.
When  used  in  conjunction  with  the  EnvirON  App  for 

iPhone  and  iPad,  the  EnvirON  range  of  products  can 

be  used  to  control  almost  any  electrical  appliance 

including  TVs,  audio  equipment,  lamps,  kitchen 

appliances,  door,  window  and  curtain  openers  and 

electrical locks.

EnvirON Remote

 is packed with features to make life 

easier and more rewarding for users. To get the most 

from this range of products, please take the time to 

read  this  manual.  Pretorian  also  recommends  that 

the  instructional  videos  on  its  website  be  accessed 

and the EnvirON Configuration Guide be read prior to 

configuring an EnvirON system.

Summary of Contents for EnvirON













Reviews: