Settings
Accessibility
Pointer Control allows you to make changes to the size and colour
of the cursor and whether it auto-hides. The ‘Pointer Animations’ setting, which defaults to on,
is the function that makes the cursor auto-hide when over an app. This can be disconcerting for
some users; in which case the slider can be used to turn the feature off. Visually impaired users
may also benefit from the Increase Contrast setting.
Connecting to Other Devices
Before you can begin using your
BLUELINE
Joystick, you must first connect it to your device. The
exact method may differ slightly from device to device, but the following basic steps will always
be necessary:
1. Turn on Bluetooth on your device, or if your device does not have Bluetooth,
purchase and plug in a Bluetooth dongle and configure it as indicated in its
instructions.
2. Ensure your
BLUELINE
’s battery is charged and wake it by pressing any of its three
buttons. Observe the flashing red LED to indicate that it is available for connection.
3. Look for the
BLUELINE
in the list of available Bluetooth devices and either click or
tap on yours, using the 4 letter/digit number written on the base of
BLUELINE
to
help identify it. Observe that it connects after a few seconds. The device will appear
in the list of available devices as something like this:
BlueLine-104.0-ABC1.
4. Check that the cursor moves as the joystick is moved and, where necessary,
configure the buttons on
BLUELINE
by reference to the following sections of these
instructions.
5. If you are unable to connect
BLUELINE
to your device, please refer to the
troubleshooting guide at the end of these instructions before referring to your
supplier or to Pretorian.
Assistive
Touch
Menu
Cursor
