Charging
1. Make sure metal pads on base of Handle are aligned with metal pads
inside Cradle - a flashing red light will blink indicating the metal contact
points are aligned and the device is charging. A full charge is indicated by
a solid red light. When battery power is low, a yellow light will appear–
indicating time to recharge.
2. The SonicPulse may show a “solid red” light (indicating full charge) when
charged for the 1st time (no “red” blinking light) – this is normal since each
product is fully checked before shipment. If you’re charging for the 1st time
and the charging light is “solid red” – still charge the device to get a “full”
charge before first use.
3.
IMPORTANT:
Make sure metal contact points on handle and the Brush
Head are dry before placing into cradle for charging.
For best results charge your SonicPulse for 24 hours prior to first use.
Simply place SonicPulse into Cradle with metal contact pads on Device
Handle aligned with metal pads inside Cradle. Plug Charger Cord (Adaptor)
into wall socket and Connector Cord into the back of the Cradle, a red light
will blink indicating the metal pads are aligned and your SonicPulse is
charging. The SonicPulse features an Over Charge Protections feature – so
the device can be charged full time in the charging cradle. Pretika recom-
mends that after each full charge to unplug and conveniently store the
charging adaptor until charging is required. You can leave the SonicPulse in
the Cradle as a counter top stand when not charging. Keep Cradle and
Charging Adaptor away from water.
Specifications
AC Adaptor – Input: 100-240V AC 50/60 Hz, Output: 5V DC 500 mA
Li Cell Battery
Micro-Fiber Bristle Brush Heads
– Attach and Remove
To attach Brush Head, align pins on the underside of applicator to slots on
device head. Once aligned, turn counter clockwise (left) until securely in
place. To remove the Brush Head, simply grip the outer plastic base of the
Brush Head firmly in one hand and the facial brush handle in the other hand
– then turn clockwise (right).
Using SonicPulse™ Facial Brush
Step 1 SonicPulse™ High Frequency Vibration Cleansing Applicator
Use daily to remove the Epidermal (outer) layer of dry and flaky skin cells.
For Use Separately
Follow instructions to attach applicator. Dampen face with warm water.
Press firmly to treated area, select mode and move Facial Brush in an
upward, circular motion. Recommended time per treated area is 30
seconds for each area - forehead, nose, chin and each cheek. The
micro-fiber bristle brush applicator is effective in removing the outer layer
of dry and flaky skin cells, lifting out impurities from within the pores and
build-up of debris from within the folds of fine lines and wrinkles to help
smooth the surface of the skin.
For Use in Combination with Skin Care Treatments
Apply cleanser, scrub or microdermabrasion crème treatments onto the
skin – spreading into a thin layer over the skin before use. Press firmly to
treated area, select mode and move Facial Brush in an upward, circular
motion. Recommended time per treated area is 30 seconds for each area -
forehead, nose, chin and each cheek.
• Press On/Off Button – solid red light will appear
• Press Mode Button to Vibration setting – red light
pulsating cleansing, blue light high frequency cleansing
• Press Intensity Mode Button to Setting for – LOW blue
light, HIGH red light
• Press On/Off Button to turn off– solid red light will
disappear
SonicPulse™ Micro-Pulsating Vibration Massage Probe
The Micro-Pulsating Probe mode can be used separately –
or combined with the High Frequency Cleansing mode.
Micro-Pulsating Vibration Massage Probe Only Mode
Follow instructions to remove applicator. Apply anti-aging, moisturizing
and other skin care treatments onto the skin – spreading into a thin layer
over the skin. Press firmly to treated area and move
Facial Brush
in an
upward, circular motion. Recommended time per treated area is 30
seconds for each area - forehead, nose, chin and each cheek to enhance
absorption of skin care treatments into the underlying skin.
• Press On/Off Button – solid red light will appear
• Press Mode Button to Vibration setting – red light pulsating, blue
light high frequency
• Press Intensity Mode Button to Setting for – LOW blue light, HIGH
red light
• Press On/Off Button to turn off– solid red light will disappear
Allow all skin care treatments to be absorbed into the skin – any residue
remaining on the skin should be kept on to be naturally absorbed into the
skin. Using the Probe without skin care treatments in an upward, circular
motion may help to smooth the outer layer of skin.
Clean
Micro-Pulsating Probe
after every use. Rinse clean and remove
residue with warm water and mild soap to remove any build-up that may
have accumulated, shake off excess water and towel dry – or gently rub the
probe against a towel for 5-10 seconds while the SonicPulse is on. Do not
place Device into charging Cradle with wet probe.
Caring For Your SonicPulse™ Facial Brush
Micro-Fiber Bristle Brush Heads
1. Clean Brush Heads after every use. Remove Brush Head, rinse clean
with warm water and mild soap to remove any build-up that may have
accumulated, shake off excess water and towel dry – or gently rub the
Brush Head against a towel for 5-10 seconds while the SonicPulse is
on. Do not attach wet Brush Head to handle while charging.
2. Do not allow liquid cleansers or moisturizers to accumulate on Brush
Head.
3. Unplug the charging cradle before you clean.
4. Replace Brush Heads as needed – they can be purchased at from your
retailer or online at www.pretika.com.
Facial Brush Handle
1. Do not use abrasive cleaners or chemicals to clean any part of the SonicPulse.
2. Clean handle with damp cloth – using mild detergent or warm water and
towel dry immediately.
Charging Cradle
1. Unplug the charging cradle before you clean using mild detergent or
warm water and towel dry immediately.
