12
How to Use Your Micro Current Device
Get Familiar with the Device
The device is built with user friendly features for a safe and easy experience.
Controls
This device has light “on” and light “off” control positions to identify treatment cycle
and performance behavior.
To Activate the Device:
press ON/Off Button– lights to color
Each treatment should last 5 to 20 minutes. We recommend using the Micro Current
Device at least five (5) times a week, for the first 90 days. After that, 2-3 times a week
to maintain results. The Micro Current Device should not be used more than 20 min-
utes in a 24-hour period. The Micro Current Device is safe to use daily, if desired. Skin
Health Tip: Exfoliate the areas to be treated 1-2 times a week for enhanced results.
Before Treatment
Start by washing your face with an oil-free cleanser. Men should shave before use as
hair can interfere with the conductivity.
Basic Treatment
(5 minutes)
When using Micro Current Device make sure you are positioned in front of a mirror in
a well-lit room.
Step 1:
For your Micro Current Device to operate properly, a conductive solution is
needed. Therefore, it is important to first apply the Conductive Gel to the skin areas to
be treated. Ensure the entire area being treated is saturated with the Conductive Gel.
On your clean, dry face apply Pretika Conductive Gel by tapping into your skin with
your fingertips. We recommend applying the Gel to each treatment area or half the
face at a time, so that the Gel does not dry out. If Gel begins to dry during your Micro
Current Device treatment, you can apply more gel.
Step 2:
Turn On Micro Current Device using the Mode Control Buttons on the inside
handle of your device, choose your desired intensity level. The green LED will be
illuminated, indicating that the device is on. You may adjust the intensity
level (micro-
current level output) to your comfort by pressing the intensity selector button.
(See photo inset on following page.)
