Presys T-1200PIR, Technical Manual

Page: 12 / 25

PRESYS

Instruments T-1200PIR
Page 9
2.2 - CONF Menu

CF PRG MEM LCD
SC BT DT BZ TU
CF : Selects the temperature unit between ºC and ºF. The ITS-90 or IPTS-68
temperature scales are selected for both the thermo-element and for the black body
cavity temperature reading/control.

ºC-90 ºF-90
ºC-68 ºF-68
LCD : This option sets the vacuum fluorescent display contrast. Use the keys

and

until you get a better contrast and finish the operation by pressing the key
ENTER.
BT : Shows the battery or the battery charger voltage value if the black body
cavity is turned off or on, respectively.
Battery level Battery state Display
4.0 to 7.0 V normal ----------
< 4.0 V low LOW BATTERY
DT : Updates the date and time of the calibrator. Thus, when the calibrator
performs a calibration in the automatic mode via ISOPLAN, all data are registered
together with date and time of occurrence. Every time the calibrator is powered off, the
internal clock does not continue to be updated. However, the ISOPLAN software can
automatically update the calibrator date and time with the computer internal clock.
Otherwise, use keys

and

to change the field that blinks and the keys

and

to
go to another field. The key ENTER confirms the last selection.
BZ: Menu that configures the piezoelectric buzzer.

NO YES ENDCAL
NO: Disables the buzzer.
YES: The buzzer beeps when the cavity reaches the set point and stabilizes.
ENDCAL: The buzzer beeps only at the end of a calibration in the automatic
operating mode
presys presys presys presys presys
ºF. The ITS-90 or IPTS- ºF. The ITS-90 or IPTS-
temperature scales are selected for both the thermo-element and for the black body temperature scales are selected for both the thermo-element and for the black body
presys presys presys presys presys presys presys presys presys presys
: This option sets the vacuum fluorescent display contrast. Use the keys : This option sets the vacuum fluorescent display contrast. Use the keys
until you get a better contrast and finish the operation by pressing the key until you get a better contrast and finish the operation by pressing the key
: Shows the battery or the battery charger voltage value if the black body : Shows the battery or the battery charger voltage value if the black body
cavity is turned off or on, respectively. cavity is turned off or on, respectively.
Battery state Battery state Display Display
presys presys presys presys presys
normal normal ---------- ----------
presys presys presys presys presys presys presys
low low LOW BATTERY LOW BATTERY
presys presys presys presys presys presys presys presys presys presys presys presys
: Updates the date and time of the calibrator. Thus, when the calibrator : Updates the date and time of the calibrator. Thus, when the calibrator
performs a calibration in the automatic mode via ISOPLAN, all data are registered performs a calibration in the automatic mode via ISOPLAN, all data are registered
together with date and time of occurrence. Every time the calibrator is powered off, the
together with date and time of occurrence. Every time the calibrator is powered off, the
internal clock does not continue to be updated. However, the ISOPLAN software can
internal clock does not continue to be updated. However, the ISOPLAN software can
automatically update the calibrator date and time with the computer internal clock.
automatically update the calibrator date and time with the computer internal clock.
Otherwise, use keys
Otherwise, use keys
 
presys
and and
 
presys
to change the field that blinks and the keys to change the field that blinks and the keys
go to another field. The key go to another field. The key ENTER ENTER confirms the last selection. confirms the last selection.
BZ: BZ: Menu that configures the piezoelectric buzzer. Menu that configures the piezoelectric buzzer.
presys presys

presys
NO YES
presys presys presys presys presys presys presys presys
NO: NO: Disables the buzzer. Disables the buzzer.
YES: YES: The buzzer beeps when the cavity reaches the set point and stabilizes. The buzzer beeps when the cavity reaches the set point and stabilizes.
ENDCAL: ENDCAL: The buzzer beeps only at the end of a calibration in the automatic The buzzer beeps only at the end of a calibration in the automatic
operating mode operating mode