Important Cord Information
This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to
fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a
qualified electrician. Do not attempt to modify the plug in any way.
A short power supply cord is provided to reduce the risk of becoming entangled in or tripping over a longer cord. Extension cords may
be used if care is properly exercised in their use.
If an extension cord is used, the marked electrical rating of the extension cord should be at least as great as the electrical rating of the
appliance. The cord should be arranged so that it will not drape over the countertop or tabletop where it can be pulled on by children
or tripped over unintentionally.
Connect the power supply cord to a 120VAC
electrical outlet only.
Getting Acquainted
Before using for the first time, become familiar with
the waffle maker features (Fig. A). Wash the waffle
tongs and wipe the waffle grids with a damp cloth
before initial use.
How to Use
1. Gather the ingredients for the batter and filling.
Do any prep work required for the filling, such
as thawing, cooking, or slicing of foods. (See
pages 3 through 6 for helpful hints, recipes, and
batter/filling options.)
2. Place the waffle maker on the countertop in the
open position. Then squeeze the waffle tongs
handle and fit the waffle tongs in the unit; the
circular portion fits on the ledge surrounding the
grids and the handle sets on the handle rest
(Fig. A). Always preheat the waffle maker with
the waffle tongs in the unit (Fig. B).
3. Close the unit and keep it in the horizontal position for preheating
(Fig. D, page 3). Plug the cord into a 120VAC electrical outlet and
preheat for 10 minutes. (The power light will be on whenever the
unit is plugged in.)
NOTE:
When using the waffle maker for the first time, a slight odor
or smoking may occur as internal manufacturing residue burns off.
This is normal during initial use.
4. While the unit is heating, prepare the waffle batter.
NOTE:
Because the grids are covered with a nonstick finish, there
should never be a need to apply vegetable oil, except in the rare
instances described in the Helpful Hints section. Never use no-stick
cooking sprays.
5. Open the waffle maker. Pour batter into the waffle maker so that the
bottom grids and waffle divider are thinly, but completely covered. This is about ⅓ cup
of batter.
6. Add the desired filling:
• Fill to the point that is halfway between the bottom and top of the square projections
(Fig. C). It is important to leave enough room so you can fully cover the filling with
the layer of batter described in step 7.
• Leave a thin margin between the filling and the inside edge of the tongs (Fig. C).
2
Fig. B
Waffle tongs in unit
Top layer fill line
Square
projections
Handle grips
Bottom layer of batter should
cover the grids and waffle divider
Waffle grids
Power light
Fig. A
Waffle tongs
Cord storage
Waffle tongs
handle rest
Red locking lever
Waffle tongs handle
Ledge
Waffle maker
handle
Waffle maker handle
Handle grips
Waffle divider
Fig. C
Place filling inside
dotted circle, up to
the halfway point
of the square
projection.
Top layer fill line
