PRESTO OWNER’S MANUAL
Page 5
POWER STAK
S E C T I O N 1
INTRODUCTION
This manual attempts to provide all of the information nec-
essary for the safe and proper installation, operation and
maintenance of Presto Lifts Inc. battery operated, Power
Stak. It is important that all personnel involved with the
installation, maintenance or operator of the stacker read this
manual. Additional manuals are available upon request or
at www.PrestoLifts.com.
Each Presto stacker is equipped with nameplate, serial num-
ber and model identifications. Please refer to these numbers
when ordering parts or requesting further information.
The Presto stackers are designed for lifting, lowering and
positioning a wide variety of loads. WHERE UNIQUE
SITUATIONS ARISE, WHICH ARE NOT COVERED IN
THIS MANUAL, CALL PRESTO LIFTS FOR FURTHER
INSTRUCTIONS.
The battery operated stackers are designed for in-plant/non-
hazardous locations only. They can be used in a 8' or larger
aisle. These units are not for personnel lifting.
!
WARNING
Maximum Lifting Capacity
UP TO 7’
2,200 LBS.
UP TO 8’
1,800 LBS.
UP TO 10’
1,500 LBS.
Ratings based on 24” Load Center
See Owner’s Manual for details
10055256
This machine is designed for powered
travel and should not be manually moved
by applying force to the Control Pod
Handles
The Control Pod and steering arm should
only be moved side to side when the
machine is under power
The Control Pod and steering arm should
be lowered to the drive position and power,
Forward or Reverse, is engaged by moving
the thumb wheel in the direction of desired
travel then the steering arm can be moved
side to side for directional steering.
Pushing or pulling on the Control Pod
Handles when the unit is not powered can
lead to damage and/or breakage
