the example of resource-gadmei.zip
)
。
The script of usid.ini in the license folder should be configured accordingly.
And do the following configuration according to requirements of ASBIS order.
[Group1]
base=PMP1101302
start=00001
--start from serial number 1
end=50001
--end at 50001
total=50000
--total is 50000
used=0
--already burned zero
current=00001
--burn serial number 1, as shown below:
Presently, this tool is only for burning serial numbers.
C
.
Click to start, then connect device to PC. If it is initial connection between
device and PC, a driver should be installed. Path for driver is
:
USB-Burning-tool/AmlogicusbBurningdriver
D
.
When driver is installed, PC then can identify devices
,
check as the
following steps
:
Click”my computer”-> management->device manager, proceeding with
right window shown as in picture 11
:
picture 11
E
.
By pressing power button for 5 seconds, burning tool starts to upgrade
device. Progress bar displays burning progress, port2 button shows
“used”, displaying between dark and light blue, as shown in picture