Prestigio P370 DVD-X, User Manual

Page: 25 / 308

25 PRESTIGIO P370DVD-X
ENG
Selecting a Page by Number
You can enter the page number directly by pressing the numeric buttons on the remote control.
Enter the three-digit page number given in the content by pressing the corresponding numeric buttons. Result: The
current page counter is incremented and the page is then displayed.
If the selected page is linked with several secondary pages, the secondary pages are displayed in sequence. To freeze the
display on a given page, press the HOLD ( ). Press the HOLD ( ) again to resume.
Using the various display options:
To display... Press the...
Both teletext information and the normal broadcast twice TTX/MIX ( / )
Hidden text (answers to quiz games, for example) REVEAL ( )
The normal screen REVEAL ( ) again
A secondary page, by entering its 4-digit number SUBPAGE ( )
The next page NEXTPAGE ( )
The previous page PREPAGE ( )
Double-size letters in the: SIZE
• Upper half of the screen • Once
• Lower half of the screen • Twice
Normal screen • Three times
Using FLOF to Select a Page
The various topics included in the teletext pages are color-coded, and can be selected by pressing the colored buttons
on the remote control.
Display the teletext contents page by pressing the MIX ( ) button.
Press the coloured button corresponding to the topic that you wish to select; the available topics are given on the status
line. Result: The page is displayed with other coloured information that can be selected in the same way.
To display the previous or next page, press the corresponding coloured button.
To display the subpage, see the following steps.
• Press the SUBPAGE( ) button. Result: The available subpages appear.
• Select the required sub-page. Sub-pages can be scrolled by using the PREPAGE ( ) or NEXTPAGE ( ) button.
Storing Teletext Pages
You can store up to 1000 teletext pages to display them later at leisure.
Select the LIST mode using the L/F ( ) button. Result: Four 3-digit numbers are displayed in different colours. The button
is used to switch between the LIST and FLOF modes.
Press the coloured button corresponding to the page that will be replaced.
Enter the new page number using the numeric buttons.
Repeat steps 2 and 3 for each page to be stored, using a different coloured button each time.
Press the STORE ( ) button until the corresponding blocks blink.