Prestigio NOBILE 157, Technical & Service Manual

Page: 48 / 126

I/O Device Configuration
The parameters in this screen are for advanced users only. You do not need to change the values in this
screen because these values are already optimized.
The I/O Device Configuration screen assigns resources to basic computer communication hardware.
The following table describes the parameters in this screen. Settings in boldface are the default and
suggested parameter settings.
NOTE: When the device is disabled, all the sub-items will be showed as [--].
Parameter Description Options
Serial Port B Enabled or disabled infrared port.
Enabled: user configuration.
Disabled: no configuration. Enabled
Disabled
Mode FIR
Base I/O Address Set the base I/O address for FIR. 2F8
3F8
3E8
2E8
Interrupt Set the interrupt for FIR. IRQ 3
IRQ 4
DMA Channel Set the DMA channel for FIR. DMA 3
DMA 1
PhoenixBIOS Setup Utility
Advanced
I/O Device Configuration
Item Specific Help
Serial Port B: [Enabled]
Mode: [FIR]
Base I/O Address: [2F8]
Interrupt: [IRQ 3]
DMA channel: [DMA 3]
Parallel
Port: [Enabled]
Mode: [Bi-directional]
Base I/O address: [378]
Interrupt: [IRQ 7]
[Enabled]
User Configuration
[Disabled]
No Configuration
F1
Help ÏÐ Select Item
F5/F6
Change Values
F9
Setup Defaults
Esc Exit ÍÎ Select Menu Enter Select ? Sub-Menu F10 Save and Exit
TECHNICAL SERVICE MANUAL Prestigio Nobile 157
41