17
MINIMUM BURNER SETTING ADJUSTMENT
Check whether the flame spreads to all burner ports when the burner is lit with the gas
tap set to the minimum position. If some ports do not light, increase the minimum gas
rate setting.
Check whether the burner remains lit even when the gas tap is turned quickly from the
maximum to the minimum position. If the burner does not remain lit, increase the mini-
mum gas rate setting.
The procedure for adjusting the minimum gas rate setting is described below.
•
Light the burner.
•
Set the gas valve to position
(minimum).
•
Remove the knob.
•
With a thin screwdriver turn the screw “A” until adjustment is correct (fig. 5.4).
Normally for LPG, fully tighten the adjustment screw.
LUBRICATION OF THE GAS TAPS
If a gas tap is difficult to turn, disassemble it, clean it carefully with petrol and spread a
little high-temperature-resistant grease on it.
These operations must be performed by an Authorized person/Service agent.
IMPORTANT
All intervention regarding installation maintenance and conversion of the appliance
must be fulfilled with original factory parts.
The manufacturer declines any liability resulting from the non-compliance of this
obligation.
Fig. 5.4
A
