Page 11
Once the sealing bag has been sealed it can be cut and removed from the front
tray ready for the instruments to be placed inside.
Once the sealing phase ends the LED will turn red and the buzzer will sound to
signal that the sealing bar should be re-opened. If the lever is left in the down
position for more than 10 seconds, the heating element will turn itself off
automatically to protect the sealing bag and the components of the pouch sealer.
After each sealing cycle the pouch sealer will check its temperature and if
necessary it will activate the heater to keep the heating element at the required
sealing temperature.
Remove the packet created and put in the object to be sealed. Insert the open
end of the packet into the front slot of the packet tray with the clear plastic film
facing up.
Warning: No object or instrument should be between the sealing bar and
cutting tool as this could damage the heating element. Do not operate
the lever without first inserting sealing bags.
