11
6
After using the cleaner
6.1
Switching off the cleaner
1. Turn the burner switch to "OFF"
position.
2.
Activate spray handle
for 1 minute
minimum on cold water to cool
down system
.
3.
Turn
"OFF" engine
.
4. Close water tap
.
5.
Activate spray handle until the
washer is depressurised.
6.
Lock the safety catch on the spray
handle.
6.2
Storing / frost protection
It is advisable to store the machine in a
frost proof place between operations. If
this is not possible the machine should
be protected in the following way:
1.
Disconnect the water inlet hose.
Remove the
nozzle
and empty it of
water.
2.
Start the machine allowing it to run
with the spray handle opened until it
is empty of water.
3.
Place a suction hose in a bucket
with 6-8 liters (1.5-2 gallons)
anti-freeze.
4.
Place the spray handle (without
spray
nozzle
) above the bucket,
activate the spray handle so that the
anti-freeze can circulate.
5.
Place the
sp
ray handle above the
opening of the anti-freeze container
and allow the machine to pump all of
the solution back into the anti-freeze
container. The anti-freeze can be re-
used, but keep in mind that it is slightly
diluted with water each time this is
done.
Important:
To avoid damage always ensure that
the washer, the hoses and the spray
lance are unfrozen before restarting.
Place the washer and the accessories
in a warm environment for some time
before starting up.
