background image

 

 

THANK YOU

: The employees and management thank you 

for selecting the Pressure-Pro brand product line. The 
production and quality assurance team have taken the 
greatest care to ensure that your new pressure washer 
exceeds the standards set by you, the customer. 

YOUR   RESPONSIBILITY: 

An operator

’s manual was 

compiled for your benefit. By studying and following the 
safety, installation, operation, maintenance, and 
troubleshooting information contained within, you can look 
forward to many years of trouble-free service from your 
equipment. Every person who will operate the equipment 
must read and follow the safety warning and operating 
instruction sections of the owner

’s manual prior to use. You 

are responsible for operating the product properly and safely. 
You are also responsible to follow the maintenance schedule 
on the back page of the manual to keep your warranty active. 

FREIGHT DAMAGE: 

If delivered by a trucking company, 

please inspect for any concealed freight damage and note 
this on the paperwork from the trucking company before 
signing. Should you find damage has occurred during 
shipping, do not return the damaged merchandise to 
manufacturer, but file a claim immediately with the freight 
carrier involved. 

QUESTIONS: 

Help us provide  you with the fastest service. 

Please  locate  the  warranty  registration  card  enclosed  and 
return it to manufacturer to register your machine. 
If problems occur, contact the dealer you bought your 
machine from, a local authorized Pressure-Pro service 
center, or call manufacturer at 1-(772) 461-4486 and ask for 
technical services. 

 

GETTING  STARTED: 

If  your  dealer  has  not  prepared  the 

machine for startup, you may need to connect the hose to the 
pressure outlet on the washer and connect the other end of the 
hose that  swivels to the trigger gun inlet and tighten. Engine 
powered pressure washers are shipped from the manufacturer 
with the fuel tanks empty. Follow the operation instructions for 
starting. Electric motor powered pressure washers will require 
an appropriate electric outlet or disconnect box and an electric 
plug that is rated for your machine

’s voltage and amperage and 

matches  to  your  electrical  socket.  Smaller  machines  are 
equipped  with  a  ground  fault  interrupter  on  the  electrical  cord 
and you will need to press the reset button after it is plugged in. 

 

ONE YEAR PARTS : 

Manufacturer promises to repair 

Pressure-Pro branded pressure washers if defective in 
materials or workmanship for one year from the date of 
original retail purchase including the cost of PARTS 
excluding transportation/shipping costs and travel time. 

ONE YEAR PARTS WARRANTY: 

Manufacturer will provide 

replacement  parts  on  accessories  and  on  all  other  product 
brands  including  Hydro  Twisters,  Hydro  Vacuum  systems 
and Hydro Loop.(Labor is not included) 

 

TWO  YEAR  EVAPORATIVE  EMISSIONS  CONTROL 
SYSTEM WARRANTY: 

Manufacturer will repair or replace a 

defective  evaporative  emission  control  system  (EECS)  part 
on  your  pressure  washer  for  a  period  of  two  years. 

(more 

information on next page) 

Items and Conditions Not Covered: 

1.  Normal  wear  items  such  as  discharge  hose,  guns, 
wands, spray arms, nozzles, quick couplers, o-rings, motor & 
generator brushes, filters, fuses, belts, & tires. 
2.  Cost of regular maintenance/adjustments, damage from 
lack of maintenance or correct operation 
3.  Damage  due  to  freezing,  abrasive  fluids,  chemical 
deterioration,  scale  build-up,  rust,  corrosion,  thermal 
expansion or water ingress. 
4.  Damage from fluctuation in electrical or water supply. 
5.  Any product or part that has been altered, modified, over 
pressurized, misused, or has been in an accident. 
6.  Dealer installation or damage from improper installation 

of  the  machine  or  alteration  by  a  dealer  or  promise  of 
additional warranty from dealer. The manufacturer warranty 
is not transferable from the dealer to the retail purchaser on 
used or rented equipment. 
7.  Labor is not paid if the dealer that serviced your machine 
is not an authorized service center. 
8.  Labor is not paid on added accessories such as  surface 

cleaners,  hose  reels,  wastewater  recovery,  water  heaters, 
and filtration. 

 

WARRANTY PROVIDED BY OTHERS: Gasoline and diesel 
engines,  electric  motors,  and  pumps  are  warranted  by  the 
manufacturer  of  the  component  and  their  warranty  is 
provided through the manufacturer

’s service centers. Contact 

your  authorized  distributor  for  the  closest  repair  center. 
Additional  extended  warranties  may  be  provided  by  engine 
or pump manufacturer. 

GENERAL   CONDITIONS

Manufacturer

’s responsibility 

with respect to claims is limited to making the required repairs 
or replacements to the original retail purchaser, and no claim 
of breach of warranty shall be cause for any cancellation or 
rescission of the contract of sale of any Pressure-Pro 
product. Manufacturer reserves the right to change or 
improve the design of any of its products or illustrations 
without assuming any 

obligation 

to 

modify  any 

product 

previously manufactured. 

This  supersedes  any  and  all  previous  warranty  statements 
for products purchased after June 2017. Manufacturer is not 
liable  for  indirect,  incidental  or  consequential  damages 
including any cost of substitute equipment, loss of revenue, 
pecuniary expense or loss, or inability to use a 
Pressure- Pro product.  Manufacturer  disclaims   all 
implied warranties, including those of merchantability and 
fitness for use for  a particular purpose.  Some states do 
not allow exclusions or limitations on how long an implied 
warranty lasts, so the above exclusions may not apply to 
you. It is the buyer

’s responsibility to ensure installation 

and use Pressure-Pro products conforms to local codes. 

 

14 

Statement of Warranty 

2/1/2017

 

Summary of Contents for SH40004HH

















Reviews: