14
SAVE THESE INSTRUCTIONS - FOR HOUSEHOLD USE ONLY
SAVE THESE INSTRUCTIONS - FOR HOUSEHOLD USE ONLY
15
Care and cleaning
After each use all safety devices must be cleaned after each use, unplug and let the pressure
cooker cool to room temperature before cleaning:
•
To remove the pressure release valve, simply pull up and the valve will release from its
spring locked mechanism. Wash it under running warm water, replace by simply pushing it
down onto the spring loaded mechanism. Always remove the pressure release valve and
clean the opening with a pin to remove any blockage that may have occurred during the
cooking process.
•
To clean underneath the aluminium inner lid, the float valve and silicon gasket pull out the
inner lid using the knob. Wash in warm soapy water.
•
Wipe the inner lid and inside the lid with warm soapy water.
•
Remove the gasket seal and wipe with warm soapy water. Dry and replace on the
aluminium inner lid. It must always be properly positioned on the inner lid. Check
periodically to make sure that it is clean, flexible and not torn.
•
Ensure the float valve is not clogged and can move up and down freely, wipe if necessary.
•
-The inner pot and lid are fully immersible in water for cleaning. Rinse inner pot and lid
under hot running water, using only a mild detergent and a soft cloth or sponge. Do not use
abrasive powders, bicarbonate of soda or bleach. Do not use scouring pads.
•
Wipe the base unit with a soft damp cloth, making sure all food residue is removed. DO NOT
IMMERSE BASE IN WATER.
Specification
Troubleshooting
Power supply
220 – 240 V – 50 Hz
Power
1000 W
Net weight
5.5 kgs
Dimensions
335mm x 338mm x 345mm
Lid does not close properly.
Check inner lid and gasket seal are correctly positioned
Lid is difficult to remove.
Float valve has not dropped. Ensure pressure has dropped to
normal.
Steam is released under the
lid during cooking.
Ensure the gasket seal is fitted correctly and not worn out.
Ensure all food residue is removed from the gasket.
The float valve does not rise.
Not enough food or water in the inner pot.
Ensure all food residue is
removed from the valve.
System error – unplug, and allow the pressure cooker to cool
down if applicable. Close the lid. If the problem persists after
re-plugging in, the appliance has developed a fault and
needs replacing.
Displays E1, E2, E3 or E4.
System error – unplug, and allow the pressure cooker to cool
down if applicable. Close the lid. If the problem persists after
re-plugging in, the appliance has developed a fault and
needs replacing.
