39
5
Large Network: Real-world Example
5.2
Network Connections
StudioLive™ Series III
AVB Networking Guide
5.2.1
Connecting Your Mixers
Connecting the three StudioLive Series III mixers to this network is relatively straight-
forward. All that needs to be done is to place the StudioLive 24R into Monitor Mixer
Mode and set the clock on the Broadcast mixer to the Network Stream, making the
mixer at Front-of-House the master clock for the system. Please note that clocking
for the StudioLive 24R is also coming from the mixer at Front-of-House. This setting
is handled automatically by the system when Monitor Mixer Mode is engaged.
Changing Network Clock
Changing the network clock can be done from the System menu. To begin, press
the Home button on your StudioLive 24 broadcast mixer.
From the Home menu, press System.
From the Network Clock menu, select Network Stream.
Note: The StudioLive 24 at Front-of-House must be connected to the
Network and powered on to properly distribute clock. Additionally, an
AVB stream must be connected to the Stream 1 input of the StudioLive
24 at broadcast as this is where network clock is derived.
The Clock Status indicator to the left of the selected clock source will illuminate
Green when your StudioLive mixer is properly synced.
Gate
FX
C
FX
D
FX
A
FX
B
EFFECTS MASTER
MASTER CONTROL
-2
-
12
-
24
-
36
-
48
-
65
Ch 6
6
Ch 7
7
Comp Gate
FX
C
FX
D
FX
A
FX
B
-2
-
12
-
24
-
36
-
48
-
65
1
Ch. 1
TB
System
Global Lockout
Audio Routing
Utils
Capture
Talkback Edit
Voume 0.5 dB
System
Permissions
User Button Assgins
Firmware
Fat Ch Load/Paste
Link Aux Mutes
Bluetooth Reg.
Sample Rate:
48 kHz
Network Stream
Off
Med
High
Low
High
Low
Network Clock:
Show Peak Hold:
LED:
Backlight:
Network Stream
Internal
FX
C
FX
D
FX
A
FX
B
Network Stream
Sample Rate:
48 kHz
Network Stream
Off
Med
High
Low
High
Low
Network Clock:
Show Peak Hold:
LED:
Backlight:
