12
2
AVB Networking
2.7 Clocking
StudioLive™ Series III
AVB Networking Guide
StudioLive Series III Mixers (Standalone Mode)
In applications where two or more mixers are on a network, functioning
independently, but configured to send and received streams to and from other AVB
nodes on the network, you must designate one mixer as the clock master.
To do this, simply set all other mixers to receive clock from the Network
Stream and be sure a stream is routed to the first AVB stream of each mixer
from the master mixer. Be sure to leave one mixer on its Internal clock.
On a StudioLive Series III console mixer, configuring external clocking can be done
from the System Menu located on the Home Screen.
On all StudioLive Series III mixers (rack or console), configuring external clocking can
be done from the Device Settings Menu in UC Surface.
FX
C
FX
D
FX
A
FX
B
EFFECTS MASTER
MASTER CONTROL
AVB Inputs
Stagebox Setup
Preamp Permissions: StudioLive 24
Name: StudioLive 24R
Mode: Monitor Mixer
Apply
i
StudioLive 24R
NSB 8.8
Monitor Mixer
Stand-alone
Stagebox
Stand-alone
Permissions
User Button Assgins
Firmware
Fat Ch Load/Paste
Link Aux Mutes
Bluetooth Reg.
Sample Rate:
48 kHz
Network Stream
Off
Med
High
Low
High
Low
Network Clock:
Show Peak Hold:
LED:
Backlight:
Network Stream
Internal
FX
C
FX
D
FX
A
FX
B
Network Stream
