5.1 Fat Channel and Voice FX
57
Power User Tip:
When looking at frequency ranges in audio, it’s important to know that the smaller the
number, the lower the frequency is. The 40 Hz and 80 Hz settings can be especially useful in reducing the
“rumble” from a nearby road or any background electrical noise or hum.
用户提示：当查看音频的频率范围时，重要的是要知道数字越小，频率越低。
40
赫兹和
80
赫兹的设置在减少来
自附近道路的
"
隆隆声
"
或任何背景“电噪声”或“嗡嗡声”方面特别有用。
If you would like more granular control, please see
Advanced Features and Customization
for more on
advanced High Pass Filter settings.
如果你想进行更细化的控制，
请看优先功能和定制
，了解更多优先高通
滤波器设置。
Gate
降噪门
Noise gating is the process of removing unwanted
sounds from your audio by cutting (or attenuating)
all signals below a set threshold. The gate will
remain “open” as long as the signal is louder than
the set threshold. Noise gates were originally
designed to help eliminate extraneous noise and
unwanted artifacts from a recording, such as hiss,
rumble, or transients from other instruments in the
room. Since hiss and noise are not as loud as the
intended audio source (You!), a properly set gate
will only allow the intended sound to pass through;
the volume of everything else is lowered. Not only
will this strip away unwanted artifacts, it will also
add definition and clarity to the desired sound.
Choose between Low, Moderate, and High. Low
will provide the least amount of gating, High will
provide the most.
Ready to build your own gate? See
Advanced Features and Customization
for advanced Noise Gate con-
trols.
噪声门是通过切断（或减弱）所有低于设定阈值的信号来去除音频中不需要的声音的过程。只要
信号比设定的阈值大，降噪门就会保持
"
开放
"
。噪声门最初的设计是为了帮助消除录音中不相干
的噪声和不需要的假象，如嘶嘶声、隆隆声或房间里其他乐器的瞬态。由于嘶嘶声和噪音并不像
预期的音源那样响亮（你的！），一个正确设置的降噪门只允许预期的声音通过；其他的声音都
被降低了。这不仅可以去除不需要的伪音，还可以增加所需声音的清晰度和明晰度。
在低、中、高之间选择。低将提供极少部分的降噪门控，高将提供大部分的。
Compressor (Comp)
压缩机
