11
4
UC Surface Control Software
4.1
UC Surface Launch Window
StudioLive™ Software
Library Reference Manual
4.1
UC Surface Launch Window
Sample Rate. Changes the sample rate.
You can set the sample rate to 44.1, 48, 88.2, 96, 176.4, or 192 kHz. A higher
sample rate will increase the fidelity of the recording but will increase the file
size and the amount of system resources necessary to process the audio.
Clock Source. Sets the digital clock source.
From this menu, you can set the clock source for your Quantum
2626 interface: Internal, External S/PDIF, or External ADAT.
Please note:
Only ADAT 1 can be used as a clock source input for your Quantum 2626.
4.2
ADAT Inputs
When a DigiMax DP88 is connected to your Quantum interface’s ADAT
Input and Output, you will be presented with ADAT controls, allowing you
to remote control your DigiMax DP88’s preamps and phantom power.
4.3
RTA
UC Surface provides a real-time analyzer (RTA) in which x = frequency and y =
amplitude for every input and output. An RTA provides a close visual representation
of what you are hearing. It provides a view of the long-term spectrum of the signal,
such as the one third-octave spectrum long-term average of a musical performance.
To enable the RTA for any input or output, select its meter from the top of the screen.
