background image

Blue Tube Technical Specifications: 

 

 Number of Channels    Two 
 
 

Performance 

THD + Noise(Unweighted)   0.05%@0dBTubeDrive    

   10%@ 30dB Tube Drive 
 
 Noise Floor     -94dBu 
 Signal to Noise     >90dB  
 Power Supply Rejection    >98dB 
 Amplifier Type     Dual Servo  
  
 

Input 

 Connectors     Neutrik

 Combo 

 Input Impedance, XLR    5k Ohms 
 Input Impedance, High Z ¼”   1Meg Ohms 
 
 

Output 

 Output Impedance, XLR Balanced  51 Ohms 

Output Impedance, ¼”TRS Unbalanced  51 Ohms 
 

Panel Controls     
 

Tube Drive     0dB to +30dB 
Gain      0dB to +40dB 
Phase Reversal 
- 20dB Pad 

 + 48V Phantom Power 
  

 Metering      

 
 8 Segment LED     -28dBu to +18dBu 
 
  

Power Supply  

 
Type   Linear Supply 

 Input      18 VAC/100mA  
 Power      15 WATTS 
 
  
 

Physical

 

 
 Weight      4lbs. 
 Size      ½   U Rack    

 

 Dimensions     8” X 5” X 1.75” 
 Mounting    Universal Rack Tray Insert  

Chassis      Steel 
Front Panel     Brushed Aluminum   
       

 

As a commitment to constant improvement, PreSonus, Inc. reserves the right to 
change any specification stated herein at any time in the future without 
notification.

 

 

Summary of Contents for Blue Tube

















Reviews: