9
Adjusting the Earpiece Volume
Adjusting the Earpiece Volume
The handset earpiece volume settings (Low, Medium and High) can only be adjusted
during a call. Press
vol
/ repeatedly to select Low, Medium and High. When you
hang up, the phone keeps the last volume setting selected.
Tone Dialing Switch-over
Tone Dialing Switch-over
Some telephone companies use equipment that requires pulse dialing (sometimes
referred to as rotary dialing). If you need to enter tone dialing digits, you can switch
over to tone dialing during the call. For example, entering your bank account number
after you have called your bank.
Notes:
The tone feature only applies when the dial mode is set to pulse.
This special number can be stored in a memory location. This is referred to
as Chain Dialing. (See “Chain Dialing” on page 11 .)
Initially make your call with the pulse dialing mode. Once your call connects, press
/
tone
. Enter the desired number. These digits will be sent as tone dialing. Once
the call ends, the tone mode is canceled and pulse dialing mode resumes.
Traveling Out-of-range
Traveling Out-of-range
During a call, as you begin to move your handset too far from your base unit, noise
increases. If you pass the range limits of the base unit, your call will terminate within
one minute.
Selecting a Different Channel
Selecting a Different Channel
If you encounter interference while using your phone, you can manually change the
phone’s channel for clearer operation. Press
channel
during a call. The
talk
/
batt
low
indicator fl ashes, indicating the phone is changing to another channel.
Page
Page
To locate the handset (while it’s off the base), press
fi nd hs
on the base. The
handset beeps for 60 seconds. Paging is canceled by pressing
fi nd hs
or any
handset key, or returning the handset to the base.
Note:
Paging is also canceled when the phone receives an incoming
call.
»
»
UC091ZH_OM.indd 9
UC091ZH_OM.indd 9
7/4/2008 1:24:30 PM
7/4/2008 1:24:30 PM