9
During this mode, if
PTT
(
2
) is pressed, the radio will transmit at that channel.
When
PTT
(
2
) is released, it will go back to dual watch mode.
When
SQ
(
4
) pressed, it will have noise from the speaker even if there is no signal.
During this mode, except
PTT
(
2
),
SQ
(
4
) and
P
(
7
), other buttons will be disable,
and it will have error sound when they are pressed.
10) CHANNEL SELECTOR:
t
/
s
keys
- Press
s
(
8
) button
to increase a channel.
See page 7
.
11) TRANSMITTING POWER
- Press
s
(
8
) button 3 seconds to select transmitting output power.
FM
: L = 1W, H = 4W /
AM
: L = 1W, H = 3W.
Every long press alternate the power level. “
H
” or “
L
” is displayed.
12) ROGER BEEP
This function is used to remind the partner, when the TX is off (
PTT
button is
released), the radio will beep to confirm to other users that your transmission
has finished.
- Press
F
(
3
) +
s
(
8
) buttons to turn the
ROGER BEEP
tone
on
, “ ” icon is displayed.
- Press
F
(
3
) +
s
(
8
) buttons to turn
off
this function, “ ” icon disappears.
13) MONITOR FUNCTION
This function is used to set the speaker level.
- Press and hold the
SQ
(
4
) button for deactivate the squelch, you can hear
the noise from speaker.
- Turn Volume knob to the suitable level.
- the
Monitor
function is active once you release the
SQ
(
4
) button.
14) ANL FUNCTION
- Press
SQ
(
4
) and release to alternate
ANL
on
/
off
. When
ANL
is
on
“
AL
” is displayed.
Note
:
This function is able to operate in AM mode only.
15) RECEIVING AND TRANSMITTING
15.1 TRANSMITTING MODE
- Pressing
PTT
(
2
) button to transmit. The LED lights up red and icon is displayed.
one bar = 0.5-1 watt = low power
two bars = 2-3 watt = high power AM
four bars = > 4 watt = high power FM
15.2 RECEIVING MODE
The LED lights up green in receiving mode. You can ear the signal on the
speaker. and icons are displayed.
Summary of Contents for Randy II M
Page 39: ...39...
