12
REMOVE
(
See the figure 2
)
2-1
: To remove the battery pack, pull down the release latch on bottom.
2-2
: Slide the battery pack away form the transceiver.
22) Frequency Display
At standby mode, press
F
(
3
) button shows the frequency
of the channel.
F) TECHNICAL CHARACTERISTICS
1) GENERAL
- Channels
: 40
- Modulation modes
: AM / FM
- Frequency ranges
: from 26.965 MHz to 27.405 MHz
- Antenna impedance
: 50 ohms
- Power supply
: 13.2 V (Randy II M) / 7.4 V (Randy II P)
- Dimensions (in mm)
: 54 (W) x 35 (D) x 120 (H) without accessories
- Weight
: 319 g with accessories (Randy II M)
357 g with accessories (Randy II P)
- Accessories supplied
: Adapter with antenna connector and
cigarette lighter plug (Randy II M)
Battery, rubber antenna and wall charger
(Randy II P)
- Filter
: ANL (Automatic Noise Limiter)
2) TRANSMISSION
- Frequency allowance
: +/- 200 Hz
- Carrier power
: 1 ~ 3 W AM / 1 ~ 4 W FM
- Transmission interference
: inferior to 4 nW (- 54 dBm)
- Audio response
: 300 Hz to 2.5 KHz
- Emitted power in the adj. channel : inferior to 20 µW
- Microphone sensitivity
: 7 mV
- Drain
: 1,8 A (with modulation power Hi)
- Modulated signal distortion
: 2 %
3) RECEPTION
- Maxi. sensitivity at 20 dB sinad
: AM: 0.5 µV - 113 dBm / FM: 0.3 µV - 116 dBm
- Frequency response
: 300 Hz to 2.5 kHz
- Adjacent channel selectivity
: 60 dB
- Maximum audio power
: 1 W
- Squelch sensitivity
: min: 0.2 µV - 120 dBm / max: 1 mV - 47 dBm
- Internal speaker
: 8 ohms, 1 W
Summary of Contents for Randy II M
Page 39: ...39...