7
OUTPUT RADIUS
PATTERN
2) BASIC OPERATIONS TO BE CARRIED OUT BEFORE
English
USING YOUR SET FOR THE FIRST TIME (without
transmitting and without using the «push-to-talk»
switch)
a)
Check the antenna connections.
b)
Turn the set on by turning the Power knob (
1
) clockwise.
c)
Set the squelch
OFF
.
See §
11
and
12
page 14
.
d)
Adjust the volume to a comfortable level.
e)
Go to channel 20 by using the channel selectors
s
or
t
key (
3
).
3) ADJUSTMENT OF SWR (Standing wave ratio)
WARNING:
This must be carried out when you use your CB radio
for the first time (and whenever you re-position your antenna).
The adjustment must be carried out in an obstacle-free area.
* Adjustment with external SWR-meter (e.g. TOS-1 PRESI-
DENT)
a)
To connect the SWR meter :
-
Connect the SWR meter between the CB radio and the antenna
as close as possible to the CB (use a maximum of 15.75 inches
(40 cm), type President CA-2C).
b)
To adjust the SWR meter:
-
Set the CB on channel 20.
-
Put the switch on the SWR-meter to position
FWD
(calibration).
-
Press the «push-to-talk» switch on the microphone to transmit.
-
Bring the index needle to
t
by using the calibration key.
-
Change the switch to position
REF
(reading of the SWR level).
Summary of Contents for RANDY FCC
Page 1: ...Handheld or Mobile CB Radio Radio CB Port til o M vil Owner s manual Manual del usuario...
Page 58: ...58...
Page 59: ...59...
