8
Using the Carabiner Clip
Use the carabiner clip to conveniently secure the PM-500 SWF to a belt or
strap.
The PM-500 SWF will float when the carabiner clip is not con
-
nected and the battery cover securely fastened.
Charging the Battery Pack
Your radio includes charging cradle and rechargeable battery pack.
Follow these instructions to recharge the radio in the charging cradle.
For the initial battery charge, make sure the radio is off for op-
timum charging.
1. Connect the adapter’s plug to DC IN 12V jack of the charg
-
ing cradle and plug the other end into an AC outlet.
2. Set the charging cradle on the desk or tabletop, and place
the radio in the charging cradle with the keypad facing for-
ward.
3. Make sure that the LED illuminates. Charge the battery
pack for 13 hours and remove the radio from the charging
cradle after charging.
Charge time may vary depending on the battery
life remaining.
For fastest charging, turn off the radio before
charging.
The charging cradle is not waterproof. If the
charging cradle falls into water, unplug it before
attempting to remove it from the water. Allow the cradle to dry
completely before reconnecting the power.
Wipe off dirt or shake water from your radio before placing in the
charging cradle if your radio is soiled or wet.
Battery Level Display
The BATTERY icon at the bottom of the screen indicates the battery level at all
times. The battery level is displayed in 4 levels.
-
-
-
-
LEVEL 4
Battery
100% full
LEVEL 3
Battery approx.
40% capacity