
16
MAINTENANCE & TROUBLESHOOTING
Due to its rugged design, your radio requires very little maintenance. However,
it is a precision electronic instrument, so you should follow a few precautions:
• If the antenna has been damaged, do not transmit except in an emergency
situation. Transmitting with a defective antenna may cause further radio
damage.
• You are responsible for continued FCC technical compliance of your radio.
• You should arrange for periodic performance checks with your PRESIDENT
dealer.
Common Questions
Problem
The radio won’t turn on
The power LED on the
charger doesn’t turn on
The radio won’t transmit
I can’t hear anything from
the speaker
Noise comes out of the
speaker all the time
I can transmit, but no one
can hear me
Where can I find my
radio’s serial number?
Things to Try
Charge the radio
• Don’t use the charger when the ambient tem
-
perature is below 0° C (32° F) or above 45° C
(113° F)
• Make sure the charging contacts on the radio
and charger are clean
• Replace the battery
• Make sure you are not in Scan mode
• Make sure you are not trying to transmit on a
receive-only channel or transmit at the wrong
power level for this channel (see the channel
lists starting on page 18)
• Check the battery power level; if it’s low,
charge the battery before trying to transmit
• Make sure the duration of each transmission
is less than 3 minutes
Adjust the squelch level; it is probably too high
Adjust the squelch level; it is probably too low
Check your UIC channel settings: does the area
you are in use different channel assignments?
The serial number is on a plate inside the bat-
tery compartment