32
3) DISPLAY
It shows all functions:
The BARGRAPH shows the reception level and the output power level.
4) RF GAIN
Adjustment of the sensitivity during reception. For long distance communications
RF GAIN should be set to maximum. You can reduce the
RF GAIN
in order to avoid
distortion when your correspondent is close by and when he has no RF POWER.
The normal setting of this function is on maximum (fully clockwise).
5) CHANNEL SELECTOR: Rotary Knob
This button allow increasing or decreasing a channel. A «beep» sounds each time
the channel changes if the
KEY BP
function is activated.
See
KEY BP
function.
6) F ~ KEY BP
F - FREQUENCY BAND SELECTION
(configuration: EU ; PL; In)
The frequency bands have to be chosen according to the country of use. Don’t use
any other configuration. Some countries need a user’s licence.
See table page 54.
Proceeding:
switch off the transceiver. Keep the key
F
pressed and switch on again.
and the letter corresponding to the configuration are blinking.
- In order to change the configuration, use the channel selector on the front panel.
- When the configuration is selected, press 1 second on the
F
key. and the letter
corresponding to the configuration are continuously displayed, a beep sounds. At
this point, confirm the selection by switching off the transceiver and then switching
it on again.
See the configurations / frequency bands table at pages 51 to 52.
KEY BP
Beep on changing the channel, keys etc... (long press)
Activate the
KEY BP
function by pressing 1 second the
KEY BP
key. A beep sounds
and
«BP»
is displayed. In order to disable the function, press during 1 second the
KEY
BP
key.
«BP»
disappears.
7) VOX ~ VOX SET
VOX
(short press)
The
VOX
function allows transmitting by speaking into the original microphone (or in
the optional vox microphone) without pressing the
PTT
switch. The use of an optional
vox microphone connected to the rear panel of the transceiver (
C
) disables the
original microphone.
Press shortly the
VOX
key in order to activate the
VOX
function.
«VOX»
appears on
the display. A new press on the
VOX
key disables the function
«VOX»
disappears.
VOX SET
(long press)
Press during 1 second the
VOX
key in order to activate the function
Vox adjustment
.
Three adjustments are possible: Sensitivity / Anti-vox level / Vox delay time . Press
shortly the
VOX
key in order to go to the following adjustment (looping , , ).
The display shows the type of adjustment followed by its level.
-
Sensitivity
: allows the adjustment of the microphone (original one or optional vox)
English
