To memorize:
Select the channel to be memorized.
- press 1 second the
MEM
key;
«MEM»
appears in the display. If the
KEY BP
function is
activated a long beep confirms the saving.
To delete a memory:
- switch off the transceiver.
- keep the
MEM
key pressed and switch on the transceiver.
- the memory is deleted.
MEM
(short press)
To recall a memory:
- press
MEM
shortly,
«MEM»
appears on the display. If the
KEY BP
function is activated
a beep sounds. The memorized channel is activate.
11) AM/FM ~ LOCK
AM/FM
(short press)
This switch allows selecting the AM or FM modulation. Your modulation mode has to
correspond to the one of your correspondent.
Amplitude modulation/AM:
is for communications in areas where there are obstacles
and over medium distances.
Frequency modulation/FM:
for nearby communications in flat, open field.
LOCK
(long press)
Allows to lock all the keys on the front panel, the rotary knob and
UP
/
DN
keys on
the microphone. An error beep sounds when a key is used and the
LOCK
function
is activated. A short press on
LOCK
activates/deactivates the
LOCK
function.
appears on the display when the function is activated.
Transmission (mike or vox) and reception remain active.
12) 6 PIN MICROPHONE PLUG
The plug is located on the front panel of the transceiver and makes the setting of
the equipment into the dashboard easier.
See cabling diagram page 55.
13) PTT
Transmission key, press to transmit a message,
is displayed and release to listen
to an incoming communication.
A) DC-POWER TERMINAL (13,2 V)
B) ANTENNA CONNECTOR (SO-239)
C) JACK FOR OPTIONAL VOX MIKE (Ø 2.5 mm)
D) EXTERNAL SPEAKER JACK (8
Ω
, Ø 3,5 mm)
English
37
