![Presenza QR001 Installation Manual And User'S Manual Download Page 17](http://html1.mh-extra.com/html/presenza/qr001/qr001_installation-manual-and-users-manual_1597248017.webp)
17
CONGLOMKB.COM
Please contact 1-877-333-0098 for further assistance.
Maintenance
FILTERS / BAFFLE NETS
When filters / baffle nets need replacing, exchange them with
similar filters / baffle nets with stainless steel clips. Also replace
filters / baffle nets that are damaged with punctures, bends, or
broken frames .
- Turn off the range hood and disconnect the power .
- Replace with an equivalent filter or baffle net, then
reconnect the power .
DANGER:
Turn off the power circuit breaker or the power
switch on the junction box before performing maintenance.
Touching circuitry inside the range hood while it is
energized will result in death or serious injury .
WARNING:
Failure to replace worn out or damaged filters
will increase the risk of fire.
WARNING:
Light bulbs can become extremely hot when
turned on . Do not touch bulbs until they are switched off
and cooled . Touching hot bulbs could cause serious burns .
REPLACING LIGHT BULBS
When light bulbs burn out, replace them with a 25 W or 35 W / JDR
16, GU10 twist and lock base light bulb.
□
Turn off the range hood, disconnect it from its power
source, and ensure that the lights are cool .
□
Turn the bulb (2) counter-clockwise and pull it out to
remove it .
□
Push in the new bulb (3) and turn it clockwise . Do not
release the bulb until you are sure the bulb has been
securely installed . Then reconnect the power .
□
If new bulbs do not operate, ensure that they are inserted
correctly .
For JDR16, GU10 twist
and lock base light bulb
For Type JC
halogen bulbs
1
Remove
Replace
2
Remove
Replace