12
Installation
For QR015:
1
Installing the Damper (If Necessary)
CAUTION:
Be very careful when installing the damper .
Applying too much force or not bending the damper
enough may damage or break the damper hinge ends .
The damper is pre-installed at the factory. Make sure that it has
not come loose during shipping and re-install it, if necessary.
- Insert one end of the damper (1) into the hinge slot (2) at
the top of the range hood (A).
- Gently bend the damper (1) and insert its other end into the
hinge slot (2) .
A
1
2
1s
2
Installing the Range Hood
As per Fig. 6, cut the required hole in the cabinet.
- Lift the range hood (A) up under the cabinet to determine
its final position. Fasten the screws to mount range hood
on the underside of the cabinet .
A
CC
24.4” (620mm)
10.6”
(270 mm)
3
Attaching the Duct
- Attach your ducting (6) (not supplied) to the range hood (A)
and connect the duct to your exterior exhaust system.
A
6
