background image

Double / Queen 
Headboard

Required Tools 

Screwdrivers

Flat Head

Using a power screwdriver 
will speed up  assembly. 

Caution

Do not over tighten any screw.
The last few turns of each screw 
should be done very slowly or by hand.

Phillips Head

Optional Tools

D

A

T

E

 S

T

A

M

P

Prepac Manufacturing Ltd.
6705 Dennett Place
Delta, BC V4G 1N4

LB-0532-R
2007-06-20

Online Option:

Fill out the Parts Order Form on our website.

Go to 

www.prepacmfg.com 

and choose 

Parts Order

 from the 

Support

 menu 

Model # SH-6643

Assembly Instructions

For the following collections:
Sonoma, Monterey, Montego, 
Broadway, Chelsea, Winslow

CALL US FIRST

1-877-PREPAC1
1-877-773-7221

Mon - Fri

7am - 4pm PST
10am - 7pm EST

For help with assembly

If you have received a damaged or defective part or 
are missing hardware. 

 
We will process replacement parts 

UPS Ground or mail.

Before you call please:

2) Note 

the

3)  Review the contents of your shipment to determine 

what you are missing. This unit is shipped in 2 
cartons. Make sure you have received both.

in 2 business days or 

less.  Parts are shipped via 

1)

Record the following information from the shipping 
label on the outside of the box.  You will need it for 
warranty purposes:

Ship To Name 

Sales Order Number

 product model number.

Hammer

This product is shipped in 

1 carton

1 of 1

Summary of Contents for SH-6643

















Reviews: