3.UNPACKING WAYS OF MAIN PARTS
13. Turn the outer tub subordinate
-subassembly, and remove the
motor screws
，
the bracket
screws, the clutch body
subassembly screws, the
retractor screws, and the drain
pump screws
(
or drain valve
subassembly screws
) ,
finally
take out motor
,
bracket
,
clutch
body subassembly
,
retractor
,
and drain pump
(
or drain valve
subassembly
)
①
Remove the motor screws, and
take out motor.
②
Remove the bracket screws,
and take out bracket.
③
Remove the clutch body
subassembly screws, and take
out clutch body subassembly.
④
Firstly make retractor and the
clutch body subassembly
separately., remove retractor
screws, and take out retractor
⑤
Remove drain pump screws
(
or drain valve subassembly
screws
)
, and take out drain
pump
(
or drain valve
subassembly
)
, (When you
install drain pump
(
or drain
valve subassembly
)
, you
remember to
coat adhesive
for preventing leakage)
14. Remove the base plate
screws, and then take out
outer tub subordinate
-subassembly on the base
plate
①
Remove the base plate screws,
and take out the base plate.
②
Take out outer tub subordinate
-subassembly on the base plate.
15. In turn counterclockwise
(or clockwise) order take
out the suspend poles, and
then put them down on the
ground.
①
When you install the suspend
poles, you remember the
installing order.
16. Remove the power cord
①
Remove the power cord
19
